Igniter Removal - Wolf CG Series Service Manual

REMOVE THE BURNER ASSEMBLY (continued)
4 Remove the burner assembly from the unit.
Igniter
BURNER ASSEMBLY INSTALLATION
Install the Burner Assembly
1 Attach the electrode wire to the igniter.
2 Place the burner assembly into the burner pan.
3 Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
Install the Burner Cap
Place the burner cap onto the burner assembly.
Install the Burner Grate
Place the burner grate onto the cooktop.

IGNITER REMOVAL

To remove the igniter, first remove the burner grate, burner cap,
and burner assembly.
828386 REV. A 06/2018
CG Professional Gas Cooktop Service Manual
Burner Cap
Burner Assembly
Electrode Wire
Remove the Burner Grate
Lift the burner grate from the unit.
Remove the Burner Cap
Remove the burner cap from the burner assembly.
Remove the Burner Assembly
1 Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2 Lift the burner assembly from the burner pan.
3 Remove the electrode wire from the igniter.
6
service.subzero.com