Denso BHT-100B User Manual page 89

Enabling/disabling the function keys
(When "2:F1-F4 ON" is
selected)
• Even if enabled in the above setting, these function keys will not work in System
Mode.
• If the screen scrolls, no function keys will move.
Chapter 2. Getting Started the BHT and System Mode
Selecting the "6:FUNC KEY" on the SET KEY menu
calls up the screen shown at left.
Highlighted is the current setting.
1 ALL OFF
2 F1-F4 ON
3 F1-F8 ON
Select a desired setting by using the numerical
keys or M1 and M2 keys, and then press the ENT
key. The screen returns to the SET KEY menu.
Display positions of function keys
73
Disables all function keys.
Enables four function keys F1
through F4.
Enables all of the eight function
keys F1 through F8.
(When "3:F1-F8 ON" is
selected)