Bht Turning-Off Notes; 1 ] "Shutdown In Progress" Message; 2 ] If The Bht Is Turned Off Abnormally - Denso BHT-100B User Manual

Chapter 2. Getting Started the BHT and System Mode

2.3.6 BHT Turning-off Notes

[ 1 ] "Shutdown in progress" message

When the BHT is turned off by pressing the PW key or by the auto power-off feature, it
displays the following message and starts preparation for shutdown.
When the above message is displayed, do not remove the battery cartridge.
If you do so and leave the BHT without a battery cartridge loaded for one hour or
more, then the error message "Contact your administrator. Note the error number.
(2XXX)" may appear when turning the BHT on at the next time.

[ 2 ] If the BHT is turned off abnormally

If the BHT is turned off abnormally* and is left without a battery cartridge loaded or
with a discharged battery cartridge loaded, then unsaved data may be lost.
(*"Normally turned off" refers to "turned off with the PW key or by the auto power-off feature.")
If the above problem has arisen, the following message will appear when you load a
fully-charged battery cartridge (or a dry battery cartridge having new dry cells) and
turn the BHT on.
31