Connection To A Television - Denon DVD-800 Operating Instructions Manual

Connection to a television

These pages explain how to connect the unit to a television and set it up so you hear the audio through the television's speakers. Connections and
procedures that enable you to enjoy more powerful sounds are described beginning on page 26.
Disconnect the AC power supply cord.
Refer to the television's operating instructions.
AUDIO VIDEO
IN IN
L
R
(Red)(White)(Yellow)
Audio/video cable (included)
(Red)(White)(Yellow)
AUDIO OUT
L
VIDEO S-VIDEO
OUT OUT
SUB- R
WOOFER
S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference signals
(C /C ) and luminance signal (Y) separately in order to achieve high
B R
fidelity in reproducing colors.
The description of the component video input terminals depends on
the television or monitor (e.g. Y/P
nect to terminals of the same color.
After making this connection, change the black level for a better pic-
ture (á page 22, Video–Black Level Control).
8
Television
To household
AC outlet
AC power supply cord
(included)
Back of the unit
COMPONENT
VIDEO OUT
Y
AC IN
C
B
C
R
/P , Y/B-Y/R-Y, Y/C /C ). Con-
B R B R
S VIDEO OUT terminal
S video cable (not included)
COMPONENT VIDEO OUT terminal
Video cable (not included)
Y
C
B
C
R
Conserving power
This unit consumes approx. 2 W, even when it is turned off.
To save power when the unit is not to be used for a long time, unplug
it from the household AC outlet.
Connect Your Unit Directly To Your Tele-
vision.
Do not connect the unit through your video cassette recorder
when setting up your home entertainment system, because
the picture may not be played correctly due to the copy guard.
TV's S video
input
terminal
Y terminal
C terminal
B
C terminal
R
TV's component video
input terminals