Connection To An Audio System - Denon Professional DN-V100 Operating Instructions Manual

CONNECTIONS
The following shows examples of connections commonly used to connect the DVD player to TV and other com-
ponents. If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround
format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL
OUT jacks. By connecting the player to a Dolby Digital, DTS or MPEG decoder, you can enjoy more convinc-
ing, realistic ambience with powerful and high-quality surrounding sound of a professional standard which can
be heard in movie theatres. Use an audio optical (Commercially available) or coaxial digital cable
(Commercially available) for the audio connections.
NOTES:
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
•
DVD player.

Connection to an Audio System

Method 1
AUDIO
Audio Input
Jacks
Audio cable
(Supplied)
DVD
AUDIO OUT
(analog)
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + AV amplifier with a built in decoder (AV control centre), Dolby Digital decoder, DTS decoder,
MPEG decoder, MD deck or DAT deck
NOTES (for Method 2 only):
• When using an AV amplifier with a built-in decoder (AV control centre), Dolby Digital, DTS, or MPEG decoder as shown in
the Method 2, set DOLBY DIGITAL, DTS or MPEG to BITSTREAM accordingly for audio output in the setup menu (refer to
page 27). Set it to PCM or OFF for the decoder that is not used currently. Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the speakers.
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
• Set DOLBY DIGITAL and MPEG to PCM, and DTS to OFF for audio output in the setup menu for connecting to an MD deck
or DAT deck (refer to page 27).
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played back while
using a decoder, etc., that is not DTS-compatible.
• When playing back a copyright-protected 96kHz (88.2kHz) linear PCM DVD, the digital sound will be down sampled at
48kHz (44.1kHz), even if you set LPCM SELECT to OFF (refer to page 27).
Optical cable (commercially available)
• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
Stereo system
– 13 –
Method 2
AV amplifier with a built in decoder
(AV control centre),
Dolby Digital decoder,
DTS decoder, MPEG decoder,
MD deck or DAT deck
Digital Audio
Input Jacks
Optical cable
(Commercially
available)
DIGITAL OUT
Audio Coaxial
Digital cable
or
(Commercially
available)
EN