Table of Contents
Advertisement
Servicing Information
f.
Inspection Method for the Outdoor Unit
1. Removal of the front panel of the outdoor unit
allows access to the electronic control device.
(Fig. 17)
2. Removing the screw on the cover and pull out the
Power transistor module. (Fig. 18 and 19)
Screw
<WARNING>
•
Be sure to return the wiring to its original position.
•
There are many high voltage components within
the heat sink cover so never touch the interior
during operation. Wait at least two minutes after
power has been turned OFF.
– 62 –
CS-G90KE
Outdoor Electronic
Controller
Cover
Power Transistor
Module
Power LED (light
on when power
supply to outdoor)
Fig. 17
Fig. 18
Fig. 19
Advertisement
Table of Contents
