2.2
REAR PANEL DEFINITION
This paragraph describes the connectors on the rear panel of the Model
CYD211. See Figure 2-1. Readers are referred to paragraphs that contain
installation instructions and connector pin-outs for each feature. A summary
of connector pin-outs is provided in Paragraph 5.6.
CAUTION: Only make rear panel connections with power supply
disconnected.
1
POWER 5-pin DIN
2
SERIAL I/O (DTE) DE-9
3
INPUT/OUTPUT DB-25
2.3
POWER INPUT CONNECTOR
Power is supplied to the Model CYD211 through a 5-pin DIN connector
located on the rear panel of the instrument. There is no power switch on the
instrument, so it is off when not plugged in, or on when plugged in. Make
sensor connections before applying power to the instrument. The instrument
requires +5 V at 300 mA, +15 V at 75 mA, and –15 V at 15 mA. Refer to
Figure 2-2 for pin out descriptions.
2-2
Omega Model CYD211 User's Manual
Figure 2-1. Model CYD211 Rear Panel
Description
Paragraph 2.3
Paragraph 4.1.1
Paragraphs 2.4 – 2.6
211_Rear.bmp
Details
Figure 5.2
Figure 5.4
Figure 5.3
Installation