Nortel North American DMS-100 Instruction Manual page 539

1-518 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone/integrated)
Clearing DA access trouble
reset
switch
7
8
Example of a TAMI response
Performing Basic HSDA Diagnostic (Circuit Pack Reset)
Performing Basic HSDA Diagnostic (Query Status)
Performing Basic HSDA Diagnostic (SBC-HSDA Loopback)
Performing Extensive HSDA Diagnostic (System Memory,
this is long test)
Performing Extensive HSDA Diagnostic (Timers and
Interrupts)
Performing Extensive HSDA Diagnostic (Data
Communication)
HSDA Diagnostic Passed
9
297-8021-544 Standard 14.02 May 2001
(continued)
6
Remove the Diagnostic Boot diskette and insert the Diagnostic Run diskette.
Leave the Diagnostic Run diskette in the disk drive until the system requests
you to remove it.
To run the diagnostic tests on the HSDA card, type:
>HSDADIAG n
Press the Enter key
where
n
is the card number
Determine if the test passes.
If test
passes
TPC packfill SBC card
Do
step 12