Raytheon 138-119 Operator's And Service Manual page 3

SAFETY INFORMATION
Edition: April 06, 2005
Change Over Box
138- -119
Caution!
"
Pay attention whilst Maintenance and Repair. Avoid contact with
cable under load. Adhere to respective safety regulations,
as there are VDE, BGV A2, OSHA 1919 and other national and
international safety standards.
This Change Over Box is not equipped with an interlocking
mechanism.
Before Maintenance or Repair the device has to be separated from
supply voltage.
ATTENTION!
"
Maintenance and Repair have to be performed only by trained
personnel, which is familiar with the safety requests of this device.
Determinations for handling of electrostatic devices must be adhered
to.
To remove or to add an assembly or a printed circuit board under load
may lead to severe faults of the device.
Insert no fuses with other technical data than the prescribed ones.
I
COMPASS
STD 22
3769DOC000001