Table of Contents
Advertisement
3.1.2
General information about establishing an earth connection
In order to comply with the stringent EMC requirements, please abide by the information
given below regarding cable connections.
Use the cable types specified in the appended wiring diagrams.
Figure 7: Establishing an earth connection
All earth connections must be made as shown in Figure 7
-- The earthing cable attached to the bracket must have a cross--section of
minimum 1,5 mm
-- The cable bracket should be mounted between two toothed washers.
-- Earth connections must be free of corrosion and well fastened.
3769DOC000002
Change Over Box
138- -119
ATTENTION!
It is essential to ensure that these connections have a common
reference to ship's earth.
Any additional components (options -- if there are) must also be
connected to the common earth!
2
.
15
COMPASS
STD22
Edition: April 06, 2005
Advertisement
Table of Contents
