Raytheon 138-119 Operator's And Service Manual page 13

Below mentioned table shows an overview of the possible switch positions and the apper-
taining operation modes.
Pos. Switch
position
1 "Auto--
matic"
2 "Sys1"
3 "Sys2"
Further information to the switching positions is given in the following sections.
3769DOC000002
Change Over Box
138- -119
Mode Status
"Normal mode" -- Output of "System 1" at the outputs of the
Change Over Box.
-- In case of a fault in "System 1" -- switching--over
to "System 2"
"System 1" -- Output of "System 1" at the outputs of the
Change Over Box.
"System 2" -- Output of "System 2" at the outputs of the
Change Over Box.
7
COMPASS
STD22
Edition: April 06, 2005