Garmin DESCENT G1 Series Owner's Manual page 144

Hide thumbs Also See for DESCENT G1 Series:
Table of Contents

Advertisement

Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Controlling a VIRB Action Camera During an Activity
Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.
1 Turn on your VIRB camera.
2 Pair your VIRB camera with your Descent watch
When the camera is paired, a VIRB data screen is automatically added to activities.
NOTE: The VIRB data screen is not available for dive activities.
3 During an activity, press UP or DOWN to view the VIRB data screen.
4 If necessary, wait while your watch connects to your camera.
5 Hold MENU.
6 Select VIRB.
7 Select an option:
• To control the camera using the activity timer, select Settings > Recording Mode > Timer Start/Stop.
NOTE: Video recording automatically starts and stops when you start and stop an activity.
• To control the camera using the menu options, select Settings > Recording Mode > Manual.
• To manually record video, select Start Recording.
The video counter appears on the Descent screen.
• To take a photo while recording video, press DOWN.
• To manually stop recording video, press STOP.
• To take multiple photos in burst mode, select Take Burst.
• To send the camera to sleep mode, select Sleep Camera.
• To wake the camera from sleep mode, select Wake Camera.
136
Controlling a VIRB Action Camera During an Activity
GUID-8F112A68-B0C3-4C1D-BD7D-93647AEB1658
EN-US
5
3
SW reduced visibility to non-mainstream accessories by moving them out of the widget loop. Widget is
added automatically after pairing through Sensor menu.
Released
05/09/2019 10:15:43
gerson
(Pairing Your Wireless Sensors, page
131).
Sensors and Accessories

Advertisement

Table of Contents
loading

Table of Contents