Garmin DESCENT G1 Series Owner's Manual page 160

Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Setting Your Heart Rate Zones
The watch uses your user profile information from the initial setup to determine your default heart rate zones.
You can set separate heart rate zones for sport profiles, such as running, cycling, and swimming. For the most
accurate calorie data during your activity, set your maximum heart rate. You can also set each heart rate zone
and enter your resting heart rate manually. You can manually adjust your zones on the watch or using your
Garmin Connect account.
1 Hold MENU.
2 Select User Profile > Heart Rate.
3 Select Max. HR > Max. HR, and enter your maximum heart rate.
You can use the Auto Detection feature to automatically record your maximum heart rate during an activity.
4 Select LTHR > LTHR, and enter your lactate threshold heart rate.
You can perform a guided test to estimate your lactate threshold
the Auto Detection feature to automatically record your lactate threshold during an activity.
5 Select Resting HR > Set Custom, and enter your resting heart rate.
You can use the average resting heart rate measured by your watch, or you can set a custom resting heart
rate.
6 Select Zones > Based On.
7 Select an option:
• Select BPM to view and edit the zones in beats per minute.
• Select %Max. HR to view and edit the zones as a percentage of your maximum heart rate.
• Select %HRR to view and edit the zones as a percentage of your heart rate reserve (maximum heart rate
minus resting heart rate).
• Select %LTHR to view and edit the zones as a percentage of your lactate threshold heart rate.
8 Select a zone, and enter a value for each zone.
9 Select Sport Heart Rate, and select a sport profile to add separate heart rate zones (optional).
10 Repeat the steps to add sport heart rate zones (optional).
152
Setting Your Heart Rate Zones
GUID-30C91919-943C-44E9-8048-901AC0881AEA
EN-US
6
6
Updating per latest SW.
Released
24/02/2022 15:16:45
burzinskititu
(Lactate Threshold, page 104). You can use
User Profile