Table of Contents
Advertisement
Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Setting the North Reference
You can set the directional reference used in calculating heading information.
1 Hold MENU.
2 Select Sensors & Accessories > Compass > North Ref..
3 Select an option:
• To set geographic north as the heading reference, select True.
• To set the magnetic declination for your location automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select Grid.
• To set the magnetic variation value manually, select User, enter the magnetic variance, and select Done.
Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Altimeter and Barometer
The watch contains an internal altimeter and barometer. The watch collects elevation and pressure data
continuously, even in low-power mode. The altimeter displays your approximate elevation based on pressure
changes. The barometer displays environmental pressure data based on the fixed elevation where the altimeter
was most recently calibrated
barometer glances to open the altimeter or barometer settings quickly.
Sensors and Accessories
Setting the North Reference
GUID-AAF67F7E-C05F-43EF-9E6E-894E4545416F
EN-US
5
3
Removed Settings menu. MARQ/fenix 6 going forward. Use previous version to support older products.
Released
26/02/2019 12:52:39
gerson
Altimeter and Barometer
GUID-0FFD6812-6604-4D97-BC0F-56194CB12EB5
EN-US
7
4
Changed widget to glance and device to watch.
Released
22/02/2022 12:12:43
cozmyer
(Altimeter Settings, page
128). You can press START from the altimeter or
127
Advertisement
Table of Contents
