Garmin DESCENT G1 Series Owner's Manual page 132

Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Getting Pulse Oximeter Readings
You can manually begin a pulse oximeter reading by viewing the pulse oximeter glance. The glance displays
your most recent blood oxygen saturation percentage.
1 While you are sitting or inactive, press UP or DOWN to view the pulse oximeter glance.
2 Wait until the watch begins the pulse oximeter reading.
3 Remain motionless for up to 30 seconds.
NOTE: If you are too active for the watch to get a pulse oximeter reading, a message appears instead of a
percentage. You can check again after several minutes of inactivity. For best results, hold the arm wearing
the watch at heart level while the watch reads your blood oxygen saturation.
Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Setting the Pulse Oximeter Mode
1 Hold MENU.
2 Select Sensors & Accessories > Pulse Oximeter > Pulse Ox Mode.
3 Select an option:
• To turn off automatic measurements, select Manual Check.
• To turn on continuous measurements while you sleep, select During Sleep.
NOTE: Unusual sleep positions can cause abnormally low sleep-time SpO2 readings.
• To turn on measurements while you are inactive during the day, select All Day.
NOTE: Turning on All Day mode decreases battery life.
124
Getting Pulse Oximeter Readings
GUID-1589E4DE-1170-4568-892E-661E3E892616
EN-US
2
3
widget to glance; device to watch
Released
20/01/2022 18:05:57
tillmonmartha
Setting the Pulse Oximeter Mode
GUID-131DFB7F-0BD1-4AE2-BCBA-98B36A3F96C4
EN-US
1
5
Combined three pulse ox tasks into this one.
Released
07/03/2022 11:28:14
cozmyer
Sensors and Accessories