Replacing The System Board - Gateway GT4015 Hardware Reference Manual

CHAPTER 3: Maintenance Basics

Replacing the system board

30
To replace the system board:
Remove the side panel by following the instructions in
1
panel" on page 12.
Disconnect any expansion card cables from the card and from the system
2
board, noting their locations and orientation. (You will reconnect the
cables after you reinstall the cards.)
Open the card retention lever.
3
Remove any expansion cards. You can slightly seesaw the card end-to-end
4
to loosen the card, but do not bend the card sideways.
www.gateway.com
"Removing the side
Card retention lever