Running Telnet - Alcatel-Lucent 7705 Manual
Hide thumbs
Also See for 7705:
- Service manual (546 pages) ,
- Configuration manual (532 pages) ,
- Interface configuration manual (226 pages)
Table of Contents
Advertisement
Running Telnet
After the IP parameters are configured, the CLI can be accessed with a Telnet connection.
To establish a Telnet connection, run a Telnet program and issue the Telnet command,
followed by the IP address.
The following displays an example of a Telnet login:
C:\>telnet 192.168.1.xx1
Login: admin
Password: ########
ALU-1#
The default login is admin.
The default password is admin.
7705 SAR-8 Installation Guide
Initializing and Provisioning
Page 123
Advertisement
Table of Contents
