Table 23: Adapter Card Installation Features; Figure 27: Installing An Adapter Card - Alcatel-Lucent 7705 Manual

Installing the Components
To maintain EMC compliance, cables that are shielded and grounded at both ends must be
used with the adapter card interfaces. Use CAT5 shielded cables with Fast Ethernet
interfaces and CAT5E shielded cables with Gigabit Ethernet interfaces (electrical).
Refer to
adapter card. For information on replacing a specific adapter card, as well as information on
its connectors and LEDs, refer to the appropriate adapter card installation guide.
Tools required:
Page 102
Replacing Adapter Cards on page 140
SLOT ID
CSM A CSM B
MDA 1 MDA 2
MDA 3
MDA 4
MDA 5
MDA 6
3

Table 23: Adapter Card Installation Features

Key Description
1 Slot guide
2 Threaded receptacle
3 Captive screw
4 Ejector lever
• torque driver for Phillips screws
for general information on replacing an

Figure 27: Installing an Adapter Card

1
A16- CND 31
Stat
Act
Pwr Port
Ports 1-16
4
7705 SAR-8 Installation Guide
2
Batt. A
7705 SAR- 8
-
Alarm
+
Fan
Critic al
Batt A
Majo r
Batt B
Mino r
Exte rnal
Alarm s
-
+
FAN
Ba tt. B
3
4
19643