Temperatures, Boiler Coding Card And Brief Scans - Viessmann Vitotronic 200 Installation And Service Instructions Manual

Temperatures, boiler coding card and brief scans

Press the following keys:
1. K + G simultaneously for
approx. 2 s.
The following values can be scanned, subject to the actual system equip-
ment level:
Display
Slope A1
Shift A1
Outd.temp.damped
Outdoor temp.act.
Set P % boiler
Output reduction %
Boiler temp.setpt.
Boiler temp.act.
Sensor 17A actual
Sensor 17B actual
Flue gas temp. Max.
Flue gas temp. actual
DHW temp. set
DHW temp. actual
DHW temp. 1 act.
DHW temp. 2 act.
Desired room temp.
Room temp.act.
Boiler coding card
Scan 1
to
Scan 9
2. a/b for the required scan.
3. d Scanning is completed.
Explanation
The adjusted outside temperature can
be reset to the actual outside tempera-
ture with e.
Boiler output
The maximum flue gas temperature
can be reset to the current value with
e.
If a cylinder temperature sensor is con-
nected.
If 2 cylinder temperature sensors are
connected.
If a remote control unit is connected.
Overview, see page 18
See page 52
Service scans
51