Temperatures and quick scans
1. Press 9 and rw simultaneously for approx. 2 seconds.
2. Select the required scan with
The following values can be scanned, subject to the actual equipment level:
Slope M1/M2/M3
Shift M1/M2/M3
Outdoor temp. adj.
Outdoor temp. actual
Sensor 17 B
Set DHW temp.
Actual DHW temp.
DHW Temp. 1. actual
DHW temp. 2. actual
Supply temperature, set
Supply temperature, actual
Room temp. set
Room temp. actual
Quick scan 1
to
Quick scan 9
or
.
3. Press
. Scanning is completed.
The adjusted outdoor temperature can be reset to the
current outdoor temperature with "D".
If a sensor is connected.
If a DHW tank temperature sensor is connected.
If two DHW tank temperature sensors are connected.
If a remote control unit is connected.
See page 35.
Service scans
21