Connecting The Equipotential Bonding; Thermal Insulation On The Vitocell Without Vitotrans; Fitting The Lower Thermal Insulation Mat - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Installation sequence

Connecting the equipotential bonding

Connect the equipotential bonding in accordance with
the requirements stipulated by your local power supply
utility and VDE [or local] regulations.

Thermal insulation on the Vitocell without Vitotrans

Fitting the lower thermal insulation mat

1.
Fig.6
Position and level the cylinder.
10
Connect the equipotential bonding in accordance
c
with the requirements stipulated by your local power
supply utility and current SEV [or local] regulations.
2.
!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and brazing.