Viessmann Vitocell 100-E Installation And Service Instructions Manual page 9

Fitting the lower thermal insulation mat and...
Note
Only use one or two of the adjustable feet to level the
cylinder body. At least one of the adjustable feet must
remain fully screwed in.
Fig. 2
Do not extend the adjustable feet beyond a total
length of 35 mm.
Fitting the thermometer sensor (if supplied) and cylinder temperature sensor
2.
1.
Fig. 3
1. Guide the thermometer sensor through the cover
strip and insert the thermometer.
≤35
3.
5.
A
(cont.)
4.
6.
7.
Installation sequence
9