Fitting The Cover Strips - Viessmann Vitocell 100-E Installation And Service Instructions Manual
Hide thumbs
Also See for Vitocell 100-E:
Table of Contents
Advertisement
Fitting the cover strips
A
2.
Fig. 8
1. Tighten the nuts on the bolts.
2. Fit the cover strip.
Version with Vitotrans:
Separate the cover strip at slot
section.
3.
1.
3. Insert the rear sections of the Vitotrans thermal
and fit the upper
A
insulation. When doing this, observe the groove in
the thermal insulation.
Installation sequence
13
Advertisement
Table of Contents
