Viessmann Vitocell 100-E Installation And Service Instructions Manual page 14

Installation sequence
Fitting the cover strips
1.
Fig. 9 Illustration shows: Vitocell 100-E, type SVPB,
600 l
Type plate
A
1. Version with Vitotrans:
mount the front section of the Vitotrans thermal
insulation.
2. Version with Vitotrans:
push the cylinder thermal insulation towards the
front by patting it. This reduces the gap between
the Vitotrans and the cylinder.
14
(cont.)
4.
3.
A
2.
3. Fit the rear cover strip to the thermal insulation.
4. Affix type plate .
A