Fitting The Thermometer, Thermometer Sensor And Cover Strips - Viessmann VITOCELL 100-E Installation And Service Instructions Manual

Installation sequence
Type SVPA 400 l: Fitting the thermal insulation

Fitting the thermometer, thermometer sensor and cover strips

2.
5.
Fig. 10
Type plate (self-adhesive)
A
Fit the thermal insulation jacket evenly around the cyl-
inder body by patting it.
14
(cont.)
7.
A
4.
6.
3.
1.
Note
Slide the thermometer sensor into the clamping
bracket at the upper base as far as possible and
tighten the wing nut.