Navigating With A Garmin Autopilot - Garmin GPSMAP 536 Owner's Manual

Garmin gpsmap 536: user guide
Hide thumbs Also See for GPSMAP 536:
Table of Contents

Advertisement

BlueChart g2 Vision data cards are susceptible to damage from
static electricity. In low-humidity environments, you should ground
yourself on a large metal object before handling the card to prevent
damage to the card.
Optional BlueChart g2 Vision preprogrammed SD cards allow
you to get the most out of your unit. In addition to detailed marine
charting, BlueChart g2 Vision has the following features:
Mariner's Eye 3d—provides a view from above and behind
the boat for a three-dimensional navigation aid
BlueChart g2 Vision Mariner's Eye 3D is more detailed than the
preloaded data.
fish Eye 3d—provides an underwater 3D view that visually
represents the sea floor according to the information on the chart.
High Resolution Satellite imagery—provides high-resolution
satellite images for a realistic view of the land and water on the
Navigation chart.
aerial Photos—provides a view of marinas and other
navigationally significant aerial photos to help you visualize your
surroundings.
detailed Roads and POi data—provides a view of roads,
restaurants, and other points of interest (POIs) along the shore.
Current data—provides a view of current-station information
GPSMAP 400/500 Series Owner's Manual
(page
auto guidance—uses the chart data and specified boat safe
depth to determine the best course to your destination
NOTE: You cannot transfer BlueChart g2 Vision data from the SD
card to your computer for backup. You can transfer BlueChart g2
Vision data from the SD card to your computer for viewing purposes
if HomePort is installed on your PC. You can only use the SD card
on BlueChart g2 Vision-compatible Garmin GPS units and when
using HomePort.
(page
16). The

navigating with a Garmin Autopilot

When you start any type of navigation (go To, Route To, guide
To, or follow Track), if you are connected to a compatible Garmin
autopilot, you are prompted to engage the autopilot.
NOTE: Autopilot can be used only with NMEA 2000 compatible
chartplotters (GPSMAP 441/441s, GPSMAP 536/536s, GPSMAP
541/541s, and GPSMAP 546/546s).
43).
Where To?
(page
49).
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents