Airport Arrival Page Options - Garmin GNC 420 Pilot's Manual & Reference

7. Rotate the small right knob (
a
the small right knob (
indicating the arrival procedure applies to all runways. For airports with parallel runways, "B"
may appear at the end of the runway designation to indicate the arrival procedure applies to both
runways.)
8. Press . To remove the flashing cursor, press the small right knob (
E

Airport Arrival Page Options

The following option is available for the airport arrival page, by pressing the
key:
Load into Active FPL? allows you to load the selected arrival into the active flight
plan. This is identical to loading an arrival procedure from the procedures page, as
described on page 66.
To load an arrival procedure from the airport arrival page:
1. Select the desired arrival, transition and runway using the steps above.
2. Press to display the airport arrival page options.
m
3. Press to select the "Load into Active FPL?" option.
E
4. The active flight plan page will appear. Press
a
) to display a window of available runways. Continue rotating
) to select the desired runway. ("ALL" may appear in the runway field,
to return to the airport arrival page.
F
r
).
m
WPT PAGES
6
Airport Arrivals
97