Active Flight Plan Options - Garmin GNC 420 Pilot's Manual & Reference

FLIGHT PLANS
4
Active Flight
Plan Options
a
c
60
To change a data field on the active flight plan page:
1. With the active flight plan page displayed, press
options window.
2a. Rotate the large right knob (
3. Rotate the large right knob (
4. Rotate the small right knob (
5. Press the small right knob (
To restore factory default settings for data fields on the active flight plan page:
1. With the active flight plan page displayed, press
options window.
2b. Rotate the large right knob (

Active Flight Plan Options

The following options (some covered on the preceding pages) are available for the
flight plan catalog:
Activate Leg? activates/reactivates the flight plan and selects the highlighted leg as
the "active leg" (the leg which will currently be used for navigation guidance).
To activate a flight plan along a specific leg:
1. Press the small right knob (
highlight the desired destination waypoint.
2c. Select the "Activate Leg?" option from the active flight plan page options and press
3. A confirmation window will appear. With "Activate?" highlighted, press
Crossfill? allows you to transfer the active flight plan between two 400 series units in
a dual unit installation. See page 58 for additional information on this feature.
to display the active flight plan page
m
d
) to highlight "Change Fields?" and press
d
) to highlight the field you wish to change.
a
) to select the desired data item and press
r
) ) to remove the cursor.
to display the active flight plan page
m
d
) to highlight "Restore Defaults?" and press
r
) to activate the cursor and rotate the large right knob (
.
E
.
E
.
E
d
) to
.
E
.
E