Honda Civic 2017 Owner's Manual page 652

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
uuIf the Battery Is
1If the Battery Is Dead
The indicators for the Adaptive Cruise Control
(ACC) * , Adaptive Cruise Control (ACC) with Low
Speed Follow * , Road Departure Mitigation (RDM)
Vehicle Stability Assist (VSA) System, Vehicle Stability
Assist (VSA) OFF, deflation warning system
pressure/deflation warning system
Mitigation Braking System (CMBS)
when you turn the ignition switch to ON
reconnecting a battery.
Drive a short distance at more than 20 km/h. Each
indicator should go off. If it does not, have your
vehicle checked by a dealer.
Deadu
* ,
* , low tyre
* and Collision
* may come on
w ( *1 after
651