Honda Civic 2017 Owner's Manual page 228

■
How to Turn Off the Auto High-Beam
You can turn the auto high-beam system off. If you want to turn the system off or
on, turn the ignition switch to ON
while the vehicle is stationary.
AUTO Position
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
( w *1 , then carry out the following procedures
To turn the system off:
With the light switch is in AUTO, pull the lever
towards you and hold it for at least 40
seconds. After the auto high-beam indicator
light blinks twice, release the lever.
To turn the system on:
With the light switch is in AUTO, pull the lever
towards you and hold it for at least 30
seconds. After the auto high-beam indicator
light blinks once, release the lever.
uuOperating the Switches Around the Steering WheeluAuto High-Beam
1How to Turn Off the Auto High-Beam
If you turn the auto high-beam system off, the system
does not operate until you turn the system on.
Park in a safe place before turning the system off or
on.
*
227