2.0 L engine models
Message
Appears if the drive mode cannot be changed due to
●
certain situations, such as a system error or adverse
driving conditions.
Appears when the vehicle is in +R mode and you
●
press the Road Departure Mitigation button after
you have deactivated VSA by pressing and holding
the
●
Appears when the vehicle is in +R mode and you
press the Collision Mitigation Braking System (CMBS)
button after you have deactivated VSA by pressing
and holding the
Appears when the vehicle is in +R mode and you
●
deactivate VSA by pressing and holding the
button. Once you have deactivated VSA, this
message will appear again if you put the vehicle into
another drive mode.
Condition
(VSA OFF) button.
button.
uuIndicatorsuDriver Information Interface Warning and Information Messages
2 Drive Mode Switch P. 429
2 Drive Mode Switch P. 429
2 VSA On and Off P. 446
2 Drive Mode Switch P. 429
2 VSA On and Off P. 446
To reactivate Honda Sensing, press the
●
to turn on VSA. After that, you can reactivate the
following features:
2 Road Departure Mitigation System P. 510
2 Collision Mitigation Braking System (CMBS) P. 462
Explanation
button again
*
163