Honda Civic 2017 Owner's Manual page 494

■
There is no vehicle ahead
A vehicle icon with dotted-line
contour appears on the driver
information interface
■
When you depress the accelerator pedal
You can temporarily increase the vehicle speed. In this case, there is no audible or
visual alert even if a vehicle is in the ACC range.
ACC stays on unless you cancel it. Once you release the accelerator pedal, the
system resumes an appropriate speed for keeping the following-interval while a
vehicle ahead is within the ACC range.
Your vehicle maintains the set speed without
having to keep your foot on the brake or
accelerator pedal.
If there previously was a vehicle detected
ahead that kept your vehicle from travelling at
the set speed, ACC accelerates your vehicle to
the set speed, and then maintains it.
uuHonda Sensing
1When in Operation
Even if the interval between your vehicle and the
vehicle detected ahead is short, ACC may start
accelerating your vehicle under the following
circumstances:
•
The vehicle ahead of you is going at almost the
same speed as, or faster than, your vehicle.
•
A vehicle that cuts in front of you is going faster
than your vehicle, gradually increasing the interval
between the vehicles.
You can also set the system to beep when a vehicle
detected in front of you comes in and goes out of the
ACC detecting range. Change the ACC Vehicle
Ahead Detected Beep setting.
2 Customized Features P. 343
Limitations
You may need to use the brake to maintain a safe
interval when using ACC.
Additionally, ACC may not work properly under
certain conditions.
2 ACC Conditions and Limitations P. 494
Continued
* uAdaptive Cruise Control (ACC)
493