uuMaintenance Under the BonnetuOpening the Bonnet
Grip
Support Rod
566
4. Remove the support rod from the clamp
using the grip. Mount the support rod in
the bonnet.
When closing, remove the support rod, and
stow it in the clamp, then gently lower the
bonnet. Remove your hand at a height of
approximately 30 cm and let the bonnet close.
Clamp
1Opening the Bonnet
Oceanian 1.5 L and 1.8 L engine models
2.0 L engine models except Thailand and Indonesian
Oceanian 1.5 L and 1.8 L engine models
2.0 L engine models except Thailand and Indonesian
•
Grab the foam.
•
The support rod gets very hot.
•
Refer to the owner's manual.