uuIndicatorsu
Indicator
Name
Parking Brake
and Brake
System
Indicator
(Amber)
(Amber)
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
*2:Right-hand drive type
*3:Left-hand drive type
* Not available on all models
106
On/Blinking
●
Comes on for a few seconds
when you turn the ignition
switch to ON
(
w
*1
, then goes
off.
Comes on if there is a problem
●
with a system related to braking
other than the conventional
brake system.
Comes on if there is a problem
●
with the electric parking brake
system and/or the automatic
brake hold system.
Models with CMBS
Comes on if there is a problem
●
with the radar sensor.
Indicator may comes on
●
temporarily when the Maximum
Load Limit is exceeded.
Explanation
●
Comes on while driving -
Have your vehicle checked by a
dealer.
With this indicator on, your
●
vehicle still has normal braking
ability.
Stays on constantly - Avoid
●
using the parking brake and
have your vehicle checked by a
dealer immediately.
●
Make sure the total load is
within the Maximum Load
Limit.
2 Load Limit P. 395
Stays on constantly - Have
●
your vehicle checked by a
dealer.
Message
*
*2
*3
—