Installing/Removing/Adjusting The Power Elevating Legrests - Invacare 3G Storm Series Owner's Operator And Maintenance Manual

All manuals and user guides at all-guides.com
SECTION 6—FRONT RIGGINGS
Legrest to Normal Position
Adjust Calfpad
Secure Calfpad
FIGURE 6.14 Raising/Lowering Elevating Legrests and/or Adjusting Calfpads
Installing/Removing/Adjusting the Power Elevating
Legrests
WARNING
To prevent personal injury, always verify proper positioning of legs and feet prior to
use. Individual user weight may impact the rate of travel for each legrest assembly.
If simultaneous operation is desired, select a speed which allows for the most
uniform travel.
DO NOT insert fingers between legrest components, otherwise personal injury may
occur.
CAUTION
NEVER allow items to become trapped between the legrest assemblies, otherwise
damage to the power legrests may occur.
Ensure that all parts of both power legrests are clear of any obstructions before rais-
ing and lowering, otherwise damage to the power legrests may occur.
NOTE: These procedures apply to wheelchairs with 2G Tarsys seating systems only.
NOTE: Power legrests are linked to the recline function of the powered seating system. Operating
the recline function automatically operates power legs. Power legrests can also be operated
independently of the recline function.
72
3G Storm Series® Wheelchairs Part No 1134791