I Dram Module Insertion; Dram Module Removal - ECS SA 486P AIO User Manual

0,1
SIM
4M*36
4M*36
8M*36
8M*36
8M*36
8M*36
8M*36
8M*36
8M*36
2. 1 . 1 DRAM Module Insertion
The SIMMs must be seated on the sockets as firmly as possible, and, because of
the fragility of the slot, you must be careful when inserting or removing the mod­
ule.
Align the module so that the pin 1 marking and comer notch of the module
1 .
correspond the SIMM socket pin 1 marking at the rear of the board. The
to
module can fit in the socket one way only. Do not force it!
2. Push the module against the clip arms with your thumbs until a "clicking"
sound is heard; the little plastic tabs appear in the latching holes on the RAM
module board, and the clip arms fully grab the module board.

DRAM Module Removal

2.1.2
If possible, use a SIMM extraction tool; otherwise use the following method:
Carefully use your thumbs
1.
of the slot.
2. The RAM module board will be automatically ejected off the clip arms.
3.
Take it out of the socket.
4. Repeat steps 1 through 3 to release the other RAM modules.
Type SIM
2,3
4M*36
8M*36
Dual
Dual
256K*36
Dual
512K*36
Dual
1M*36
Dual
2M*36
Dual
4M*36
Dual
8M*36
bend outward the plastic tab ends on both sides
to
Memory Configura/ion
Memory
Type
Amount
64M
Dual
96M
64M
66M
Dual
68M
72M
Dual
SOM
96M
Dual
128M
2-3