Table of Contents
Advertisement
Chapter 2
Memory Configuration
In this chapter, the SA486P AIO DRAM configurations are discussed, followed by
instructions for DRAM module installation and removal. Users are recommended
to read through this chapter before installing or removing memory.
2.1
System Memory
The SA486P AIO DRAM provides tremendous flexibility to support a number of
.ifferent on-board DRAM configurations. The on-board DRAM is installed with
SIMM (Single-In-Line Memory Module). There are four banks of DRAM module
capable of supporting 2MB up to 128MB of on-board memory.
The location and layout of all the memory is illustrated below and shown in Figure
3.1.
The table below list'> all the possible DRAM module combinations and the total
memory amount for each option.
SIMM
MEMORY
SIM2
SIMO
SIMI
Memory Configuration
SIM3
2-1
Advertisement
Table of Contents
