Table of Contents
Advertisement
User's Manual
SA486P A/0
5.6
Netware 3.1 Installation Procedure
Install Netware as
exp lained
ll
fo
owing information
e
Us
the COPY command to copy the DOS device driver from the SDMS SCSI
l.
Drivers diskette to your boot drive. The DOS device drivers are DOSCAM.SYS
and SCSIDISK.SYS.
2.
Modify your CONFIG. SYS tile on the boot disk by adding
the
at
bottom:
Device=C:<Path>DOSCA M.SYS
Device=C:<Path>
3.
Create a directory called NET311. Copy into this directory the files
SCSI_DSK. DSK, SCSI_SIM.NLM, and SCSI_XPT. NLM from the SDMS
Device Drivers diskette.
all
4.
Copy
the tiles from the Netware system disks into the NET311 directory.
5.
Reboot the computer from the hard disk drive. To
SERVER ....................... <Enter>.
When prompted, enter the name of the file server. See the chapter on file server
6.
installation
in the Netware Installation Manual for restrictions.
7.
At the Netware prompt, type:
Load SCSI DSK.
This command will cause all the drivers to he listed.
To bring up the installation menu, at the Netware prompt type:
8.
Load
INSTALL.
Continue with the insudlation accorJing to the tile saver installation chapter in
the Novell Netware Installa tion Manua l.
The Device Drivers Diskette bundled with the SA486P AIO
Note:
mainboard contains the README text file which provides
detailed description of the installation procedure.
5-4
in
N
the Novell
is
provided to assist in the installation.
SCSIDISK.SYS
re
Installation Manual.
etwa
386
the
start t
he server program, type:
The
following lines
a
Advertisement
Table of Contents
