Table of Contents
Advertisement
User's Manual
SA486P A/0
5.2 SCSIDISK.SYS Installation Procedure
1.
Use the COPY command to copy the appropriate driver from the SDMS SCSI
Drivers diskette to your boot drive.
2.
Add the following line to your CONFIG. SYS:
Device=C:<Path>
Important
If the DOSCAM driver is also desired, list the drivers in your
:
CONFIG.SYS in the following sequence:
Device=C:<Path> DOSCAM.SYS
Device=C:<Path>SCSIDISK.SYS
Note:
The Device Drivers Diskette bundled with the SA486P AIO
mainboard contains the README text file which provides
detailed description of the installation procedure.
5.3
CDROM.SYS Installation Procedure
1.
Use the COPY command to copy the appropriate driver from the SDMS SCSI
Drivers diskette to your boot drive.
2.
Add CDROM.SYS to your CONFlG.SYS tile. It comes after DOSCAM and
SCSIDISK (if these drivers are also being used) in the following order:
Device=C:<Path>DOSCAM.SYS
Device=C:<Path> SCSIDISK.SYS
Device=C:<Path> CDROM.SYS
Important
The /D: is not a drive letter designation; it indicates the name
:
you wish assigned to your CD-ROM. The NAME must be in
cluded and can be of any combination with 8 characters.
3.
Add the MS-DOS LASTDRlVE command to the CONFIG. SYS file.
LASTDRIVE=x
with "x" specifying a drive letter in the range C through
5-2
SCSIDISK.SYS
/
D:NAME
a
Z.
Advertisement
Table of Contents
