Table of Contents
Advertisement
Microsoft's CD-ROM Extension (MSCDEX.EXE) should be executed from the
4.
AUTOEXEC. BAT file in order to access your drive. Add the following line to
your AUTOEXEC.BAT tile:
MSCDEX /D:NAME
For example
if the line "Device= C: <Path> CDROM.SYS ID:MY CD" is
,
in the CONFIG.SYS, then the line "MSCDEX ID:MY_CD" should also be in
the AUTOEXEC.BAT tile.
The Device Drivers Diskette bundled with the SA486P AIO
Note:
mainboard contains the README text file which provides
detailed description of the installation procedure.
5.4
ASPICAM.SYS Installation Procedure
1.
Usc the COPY command to copy the ASPICAM.SYS driver from the SDMS
SCSI Drivers diskette to your boot drive.
2.
Add ASPICAM.SYS to your system's CONFIG.SYS file after DOSCAM. The
lines in your CONFIG.SYS tile might look like the following:
Device=C:<Path> DOSCAM.SYS
Device=C:<Path>
Note:
The Device Drivers Diskette bundled with the SA486P AIO
mainboard contains the README text file which provides
detailed description of the installation procedure.
3.0 & 3.1
5.5
Windows
NCR SCSI drivers are compatible with Windows 3.0 and 3. 1. Additional drivers
or configuring are no longer needed.
ASPICAM.SYS
Installation Procedures
Device Drivers InstallaJion
a
a
5-3
Advertisement
Table of Contents
