Adjustable Center-Mount Foot Platform - Pride Mobility Front Riggings Quantum Basic Operation Instructions

Adjustable Center-Mount Foot Platform

The adjustable center-mount foot platform is installed directly
on the seating system to accommodate users who require a
positioning system but prefer a foot platform. The adjustable
center-mount foot platform is height and angle adjustable
and is operated using an angle adjustment bracket or a lever.
The angle of each foot plate can be individually adjusted.
To adjust the foot platform angle using the angle
adjustment bracket:
1. Remove the angle adjustment hardware from the angle
adjustment bracket. See figure 11.
2. Adjust the foot platform to the desired angle. See
figure 11.
3. Reinstall the angle adjustment hardware into the angle
adjustment bracket and tighten.
To adjust the foot platform angle using the lever:
1. Pull down on the lever. See figure 11.
2. Adjust the foot platform to the desired angle. See
figure 11.
To return the foot platform to a neutral position:
1. Pull down on the lever and press against the foot platform
to lower it.
To adjust the foot platform height:
1. Loosen the height adjustment screws. See figure 11.
2. Slide the foot platform up or down to the desired height.
3. Tighten the height adjustment screws.
4. Repeat on the other side if necessary.
To adjust the angle of each foot plate:
1. Flip up the foot plate and locate the screw. See figure 10.
2. Turn the screw to raise or lower the front of the foot plate.
Figure 10. Angle Adjustment for Foot Plate
Setscrews
Figure 11. Adjustable Center-mount Foot Platform
BASIC OPERATION INSTRUCTIONS
Angle Adjustment Hardware
-5° 0° 5°
11
10°
Angle
Adjustment
Bracket
Lever
Height
Adjustment
Screws