Pride Mobility Fusion E Owner's Manual
  1. Manuals
  2. Brands
  3. Pride Mobility Manuals
  4. Wheelchair
  5. Fusion E
  6. Owner's manual
Pride Mobility Fusion E Owner's Manual

Pride Mobility Fusion E Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Pride Mobility Fusion E

Summary of Contents for Pride Mobility Fusion E

  • Page 1 OWNER’S MANUAL...

  • Page 2: Safety Guidelines

    On the product, this icon is represented as a black symbol with a red circle and red slash. NTENDED The intended use of this Pride Mobility Products device is to provide mobility assistance to persons with mobility impairment who have the capacity to operate a motorized mobility power chair.
  • Page 3 11 Battery and Charging Information …………. page 19 General Warnings …………………………… page 22 Routine Maintenance ………………………. page 26 Trouble Shooting Guide ……….…………… page 28 Warranty ……………………………………… page 31 Copyright © 2022 Pride Mobility Products UK. INFMANU4005/Rev 0/August 2022 Fusion E - 2 -...
  • Page 4 The Fusion E® power chair is classified as a category B vehicle under the European power chair standard EN 12184. It is intended for the use of people of all ages who may have difficulty walking distances or for periods of time.
  • Page 5 Pride to enhance or preserve the safe use of this product. SHIPPING AND DELIVERY Before using your Fusion E® power chair, make sure your delivery is complete as some components may be individually packaged. If you do not receive a complete delivery, please contact your authorized Pride Provider immediately.
  • Page 6 ISO 7176-19 as a crash worthiness testing standard for occupied transfer of mobility devices. Fusion E® has been tested and successfully passed the ISO 7176-19 for four-point tiedowns.
  • Page 7 Class II equipment. Power Chair information label Manufactured in Do not remove the anti-tip wheels. Fusion E - 6 -...
  • Page 8 3. QUICK START GUIDE Assembly When lifting always keep the back straight, bend the knees and use the lifting handles provided. Ensure your freewheel mechanism is fully engaged, so your power chair cannot move while assembling. Lift the seat onto the seat post and press down to ensure it is fully engaged. Battery Charging The battery MUST be charged for 12 hours before first use.
  • Page 9 Transporting Your power chair can be disassembled for transportation (no tools needed): Power off Pull the black strip on the back, so that the latch heads protruding from the fixed plate on both sides exit the fixing plate. Fold the seat down.(8-2) Legrest can be removed if there is little room to move.
  • Page 10 4. FEATURES Fusion E - 9 -...
  • Page 11 ® Model Fusion E Weight capacity (KG) ≤150 kg / 330 lbs. Input power (VA) ≤450 L(mm) 1050±30 W(mm) 630±30 H(mm) 1080±30 NW(kg) 96±5 Backrest folding angle ≤125 Armrest distance (mm) 380mm – 558mm Max speed ≤6 km/h Level ground braking 40mm Max.

  • Page 12: Installation And Adjustment

    5. INSTALLATION AND ADJUSTMENT Before unpacking, please make sure that the appearance of the carton has no obvious damage or crushing; it should list serial number and other related products. (1) When opening the main body carton to pick up the power chair, keep the back straight and bend the knee;...
  • Page 13 (6) Take out the pedals, install them and tie the leggings (8-4) (7) Remove the handrail, install the left and right handrails, and use the Allen key (included) tool to tighten the headless screws under the armrests. (8-7) (8) Insert the rear tube of the controller into the right-hand tube (left) and adjust it to the appropriate position (8-5);...
  • Page 14 Warning Especially when on a slope, please ensure the brake handle is in the engaged state, otherwise the power chair may roll. Make sure that the brake lever is in the engaged state after using to prevent this from happening. (4) Backrest folding angle adjustment Pull the middle black strap, so that the latch heads protruding from the fixing plate on both sides exit the fixing plate.
  • Page 15 3 Instructions for use (1) Normal working conditions The power chair should work properly under the following conditions: Ambient temperature: 5 °- 40 ° C; Relative humidity: ≤ 80%; Atmospheric pressure: 80kPa - 105kPa; Power supply voltage: AC 220V±22V, DC 24V±1V; Power frequency: 50Hz ±...

  • Page 16: Control Functions

    (4) Control functions Switch Flash warning Front light Horn button Acceleration/deceleration button Turn light Warning If the power status light is red, reduce the maximum travel speed to increase mileage. To prevent battery damage, remember to charge the battery overnight before you use the power chair for the first time.

  • Page 17: External Charger

    Yellow light: Charging Green light: Charging completed (6) External charger The external charger is equipped with two parts: the charger body and the transmission line (8-13). Your power chair is equipped with a dedicated external charger (8-14); Please note that chargers below 5 amps should be used. The charger should be provided by the designated dealer.
  • Page 18 Note: Charger specification model: HP8204B; Charger input specifications: 115/230VAC 60/50Hz 2.7/1.7A Charger output specification: 24VDC/5A The charger indicator has 3 states: 1) Green: Power is on; 2) Yellow: Charging; 3) Green: Battery is fully charged. Please note that power chairs have a safe circuit to prevent the chair moving during charging.
  • Page 19 Warning! Do not attempt to open the battery charger case/battery case. If the battery charger does not appear to be working correctly, contact your authorized provider. If the battery charger is equipped with cooling slots, then do not attempt to insert objects through these slots. Be aware that the battery charger case may become hot during charging.

  • Page 20: Battery And Charging Information

    6. BATTERY AND CHARGING INFORMATION GENERAL INFORMATION Batteries are the power source for almost all of the modern mobility products available today. The design of batteries used in mobility products is significantly different from the batteries used to start a car for example. Car batteries are designed to release a large amount of power over a short period of time, whilst mobility batteries (commonly called deep cycle batteries) release their power evenly over a long period of time.
  • Page 21 BATTERY, CHARGING AND BATTERY MAINTENANCE Battery If the appearance of the battery is damaged, please handle it carefully. Watch out! The battery fluid is corrosive. Avoid direct contact. If contact with skin or clothing occurs, rinse immediately with soap and water. If it comes into contact with your eyes, immediately rinse your eyes with water for at least 10 minutes and seek medical attention.
  • Page 22 CAUTION: Do not expose the battery to high temperatures. Do not recharge under outdoor conditions. Do not smoke near the charge. Exclude all open flames from the area. Range We measure the mileage of power chairs with uniform standards and methods, but there are still differences in actual mileage due to the differences in terrain, user weight and environmental conditions.

  • Page 23: General Warnings

    7. GENERAL WARNINGS PERSONAL & OPERATIONAL GUIDELINES Drive profiles should only be adjusted by healthcare professionals and approved agents/dealers, who are totally conversant with the process. They must also fully understand the user’s capabilities and the user’s ability to operate the power chair safely. Incorrect settings may cause injury or damage to the user, bystanders, the power chair and/or nearby property.
  • Page 24 DO NOT attempt to use your power chair without first checking that all wiring harnesses are connected and all detachable parts/assemblies are correctly aligned and firmly fixed in place. DO NOT attempt to fit parts, accessories or adapters that are not authorized. DO NOT connect any medical device, such as a ventilator, life support machine etc.
  • Page 25 DO NOT attempt to reverse down slopes in excess of 8 degrees. When negotiating ramps or inclines, if the throttle lever is released a roll back will occur. In FORWARD or REVERSE motion the power chair will ROLLBACK approximately 30cms (1ft), before the brake engages.
  • Page 26 Maximum User Weight Limitations FUSION E ≤150KG (330 lbs.) Running noisy ≤70 db. DISPOSAL The symbol above means that in accordance with local laws and regulations your product should be disposed of separately from household waste. When this product reaches the end of its life, take it to the collection point designated by local authorities.

  • Page 27: Routine Maintenance

    8. ROUTINE MAINTENANCE The following table gives an indication as to when routine maintenance checks should be made. Maintenance, fault finding and servicing should be carried out by an authorised dealer unless otherwise indicated The checks below can be carried out by the user Battery charge check (Fig.
  • Page 28 Fig. A Fig. B Fig. C Storage When storing your power chair for long periods (in excess of one week), charge batteries for 12 hours and then disconnect the batteries to minimize battery discharge. Electronic faults Do not attempt to investigate faults in the control box, the control pod or charger as the design and set up of the electronics is of a safety critical nature.

  • Page 29: Troubleshooting Guide

    9. TROUBLE SHOOTING GUIDE SYMPTON POSSIBLE CAUSE SOLUTION Batteries not charged for long Charge batteries for eight Shortened enough hours or more range Batteries weak and cannot Replace battery pack hold charge Battery pack fault Replace charger Charge fault Contact local mobility dealer Charger loom or plug Check plugs and looms damaged...
  • Page 30 DO NOT ATTEMPT TO OPEN ANY PARTS OF THE POWER CHAIR CONTROL SYSTEM, BATTERY PACK, LOOMS, PLUGS OR BATTERY CHARGER. THE CONTROL SYSTEM IS SAFETY CRITICAL AND THERE ARE NO USER SERVICEABLE PARTS Your power chair is fitted with a self-diagnostic controller that will give a sequence of audible beeps when an error is detected to help you, or the authorized service agent, determine the drive electronics fault.
  • Page 31 Accelerate Check all the accelerate Speed limited variable resistor, variable resistor, Speed variable resistor Speed limited limited variable resistor issue variable resistor or or other wiring. other wiring issue Motor and other Motor voltage Check Motor and other relative wirings issue relative wirings.

  • Page 32: Warranty Condition

    10. WARRANTY Warranty condition The repair or replacement will be carried out by an authorized Dealer/Service Agent. To apply the warranty conditions should your power chair require attention under these arrangements, notify the designated distributor immediately giving full information about the nature of the difficulty. Should you be outside the locality of the designated distributor, work under the “Warranty Conditions”...
  • Page 33 Please find the distributor’s address and telephone number on the last page. In the event of a breakdown, contact them and try to give all relevant details so they can help you quickly. The power chair shown and described in this manual may not be exactly the same in every detail as your own model.
  • Page 34 MedPath GmbH 27 Old Gloucester Street, Mies-van-der-Rohe-Strasse 8, London, WC1N 3AX 80807 Munich United Kingdom Germany DISTRIBUTORS Pride Mobility Products Europe BV Pride Mobility Products France De Zwaan 3 26 Rue Monseigneur Ancel 1601 MS Enkhuizen 69800 Saint-Priest The Netherlands France www.pridemobility.eu...

Table of Contents