Table of Contents
Advertisement
„ Deleting pairing
Select [Delete Pairing] and press the Q button.
1
Select [Yes] and press the Q button.
2
# When you have paired the camera with a remote control, you have to perform [Delete
Pairing] to reset pairing information before you pair the camera with a new remote control.
Shooting from the remote control
To connect the camera and remote control wirelessly, be sure that [Bluetooth] (
is set to [Onr<]. When set to [Onr<], r< is displayed and the camera will be on
standby for wireless communication with the remote control as soon as it is turned on.
Rotate the mode dial of the remote control to K or
1
n.
2
Press the shutter button on the remote control to
take pictures.
• When the mode dial of the remote control is set to K
(still photography mode): When you lightly press the
shutter button of the remote control down to the first
position (press the shutter button halfway), the AF
confirmation mark (() will be displayed, and a green
frame (AF target) will be displayed in the focus location.
• When the mode dial of the remote control is set to n
(movie recording mode): When you press the shutter
button of the remote control, movie recording starts.
Press the shutter button of the remote control again to
stop movie recording.
P A S M B
n
)
P. 262
Shutter button
8
281
EN
Advertisement
Table of Contents
