Olympus OM System OM-1 Instruction Manual page 165

„ When [Overlay] is set
When [On] is selected for [Overlay], a list of pictures is displayed.
Highlight a picture using FGHI and press the Q button.
1
• Only RAW images can be selected.
Press the MENU button to close the menu.
2
• A X icon will be displayed.
• The selected picture is overlaid on the screen.
3 Take pictures.
• You can take additional pictures that will be overlaid on the previously-chosen
photograph.
# The camera will not enter sleep mode during multiple exposure photography.
# Pictures taken with other cameras cannot be used for multiple exposures.
# RAW pictures taken using High Res Shot cannot be used for multiple exposures.
# The RAW pictures listed in the image-selection display when [On] is selected for [Overlay]
are those processed using the settings in effect at the time the photograph was taken.
# Exit multiple exposure mode before adjusting shooting settings. Some settings cannot be
adjusted while multiple exposure mode is in effect.
# Performing any of the following operations after the first shot is taken ends multiple
exposure photography:
turning the camera off, pressing the q or MENU button, choosing a different shooting
mode, or connecting cables of any type. Multiple exposure is also canceled when the
battery is exhausted.
# The image-selection display for [Overlay] shows the JPEG copies of photographs taken
with RAW + JPEG selected for image quality.
# Live composite photography ([Live Comp]) is not available in mode
# The following are not available in multiple exposure mode:
HDR, bracketing, focus stacking, interval-timer photography, keystone compensation,
the live ND filer, fisheye correction, and High Res Shot.
%Pictures taken with RAW selected for [KK] can also be overlaid during playback.
g "Combining Pictures (Image Overlay)" (P. 203)
B
.
4
165
EN