Adjusting The Headphone Volume (Headphone Volume); Time Codes (Time Code Settings) - Olympus OM System OM-1 Instruction Manual

Adjusting the headphone volume
Menu
Headphone Volume Adjust the volume of audio output to the headphones.
Time Codes
Adjust time code settings. Time codes are used to synchronize picture and sound
during editing and the like. Choose from the following options.
Menu
Time Code Mode
Count Up
Starting Time
# When setting [Starting Time] to [Current Time], be sure that the camera shows the correct
time. g "Setting the Camera Clock (X Settings)" (P. 257)
# Time codes are not recorded on high-speed movies (P. 142).
MENU n n n5. Sound Recording/Connection n Headphone
Volume
MENU n n n5. Sound Recording/Connection n Time Code
Settings
Choose a time code recording option. Use time codes where precise
timing is required.
[Drop Frame]: Drop-frame time codes. The time code is adjusted to
compensate for deviations from the recording time.
[Non-DF]: Non-drop-frame time codes. The time code is not
adjusted to compensate for deviations from the recording
time.
Choose how the time count is incremented.
[Rec Run]: The count is incremented only during recording.
[Free Run]: The count is incremented continuously, including when
recording is not in progress or the camera is off.
Choose the starting time code.
[Reset]: Reset the time code to 00:00:00
[Manual Input]: Enter the time code manually.
[Current Time]: Set the time code to the current time, frame 00.
(Headphone Volume)
P A S M B
(Time Code Settings)
P A S M B
n
n
4
181
EN