Olympus OM System OM-1 Instruction Manual page 275

4 If the camera is able to connect, the network will be displayed with a check
(v) next to the network name.
• Password-protected networks are indicated by a t icon.
• If the camera has been paired with more than one computer, you will be prompted to
choose a computer before the network is displayed. Highlight the desired computer
using the FG buttons and press the Q button.
• The camera can be used only with the selected computer. To select a different
computer, you must first terminate the current connection.
• If the connection fails, the camera will display a
message to that effect, followed by the options shown in
Step 3. Repeat Steps 3–4.
Press the Q button to exit to the shooting display.
5
• Standard shooting indicators will be displayed. O on
the screen will turn green.
!
Connecting to Previously-Selected Networks
• The camera will automatically reconnect to previously-selected networks when you select
[PC Connection] via the rO icon. You will not be required to supply a password.
• If multiple networks are available, the camera will connect first to the most recently-used
network.
• Once the camera has connected, it will display a list of available networks with the current
network shown by a check mark v.
• To connect to a different network, highlight it in the list and press the Q button.
• If the camera has been paired with more than one computer on the network, you will be
prompted to choose a computer before the network list is displayed. Highlight the desired
computer using the FG buttons and press the Q button.
100 % 100 %
Connection failed
O
1023 1023 [ 1 : 02 : 03 ] [ 1 : 02 : 03 ]
L F F
r r 1 1 1
O O
100 % 100 %
P P
250 250 5.6 5.6 - 0.0 0.0
0 0 +
1/ 1/ F F
60p L - 8 L - 8
4K 60p
1
S - AF S - AF
8
3 3
200 200
ISO ISO
Auto Auto
275
EN