Setting Playback Functions; Rotating Pictures (Rotate); Protecting Pictures (0); Copying An Image (Copy) - Olympus OM System OM-1 Instruction Manual

Setting playback functions

Rotating Pictures
Choose whether to rotate photographs.
Play the photograph back and press the Q button.
1
Select [Rotate] and press the Q button.
2
Press F to rotate the image counterclockwise, G to rotate it clockwise; the
3
image rotates each time the button is pressed.
• Press the Q button to save settings and exit.
• Movies and protected images cannot be rotated.
%The camera can be configured to automatically rotate portrait-orientation pictures during
playback. g "Automatically rotating portrait-orientation pictures for playback (R)"
(P. 205)
[Rotate] is not available when [Off] is selected for [R].
Protecting Pictures
Protect images from accidental deletion.
1
Display the image you want to protect and press the
0 button.
• 0 (protection icon) appears on the image. Press the
0 button again to cancel protection.
• When an unprotected image is displayed, you can hold
the 0 button and rotate the front or rear dial to protect
all images displayed while the dial is rotated. Any
previously-protected images displayed while the dial is
rotated will be unaffected.
• When a protected image is displayed, you can hold the 0 button and rotate the front
or rear dial to remove protection from all images displayed while the dial is rotated. Any
previously-unprotected images displayed while the dial is rotated will be unaffected.
• The same operations can be performed during playback zoom or when a picture is
selected in the index display.
%You can also protect multiple selected images. g "Selecting Multiple Pictures (Share
Order Selected, Rating Selected, 0, Copy Select, Erase Selected)" (P. 197).)
# Formatting the card erases all data including protected images.
Copying an image
When there are cards with available space in both slots 1 and 2, you can copy an
image to the other card.
Display an image you want to copy and press the Q button.
1
Highlight [Copy] and press the Q button.
2
3
Choose whether to specify the destination folder.
• If you select [Assign], choose a destination folder.
• If a folder has already been specified, the name of the folder is displayed. To select a
different folder, press I.
(Rotate)
(0)
0 (protect) icon
r r
100 % 100 % O O
100 100 3.5 3.5 0.0 0.0 200 200 4:3 4:3
1/ 1/ ± ±
F F ISO ISO
2022/02/01 16:30:43 2022/02/01 16:30:43 101-0001 101-0001
(Copy)
5
0 0
N+RAW N+RAW
L
19/32 19/32
1
193
EN