Olympus OM System OM-1 Instruction Manual page 119

„ Attaching Compatible Flash Units
The methods used to attach and operate external flash units vary with the unit. See
the documentation provided with the unit for details. The instructions here apply to the
FL-LM3.
# Confirm that both the camera and flash unit are off. Attaching or removing a flash unit
while either the camera or flash unit is on could damage the equipment.
Remove the hot shoe cover and attach the flash.
1
• Slide the flash in until the foot clicks into place at the
back of the shoe.
Position the flash head for bounce-flash
2
photography or direct lighting.
• The flash head can be rotated up and left or right.
• Note that flash output may be insufficient for correct
exposure when bounce flash lighting is used.
Rotate the flash ON/OFF lever to the ON position.
3
• Rotate the lever to the OFF position when the flash is
not in use.
Hot shoe cover
ON/OFF lever
4
119
EN