Mercedes-Benz E-Class 2010 Owner's Manual page 212

vating the EASY-ENTRY/EXIT feature, make
sure that nobody can become trapped.
Do not leave children unsupervised in the
vehicle, even if they are secured in a child
restraint system. The children could open the
driver's door and thereby unintentionally acti-
vate the EASY-ENTRY/EXIT feature and
become trapped.
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Convenience submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Easy Entry/Exit feature.
You will see the selected setting: on or
off.
Press the a button to save the setting.
X
Switching the belt adjustment on/off
Further information on belt adjustment
( page 42).
Y
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Convenience submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Belt adjustment: function.
You will see the selected setting: on or
off.
Press the a button to save the setting.
X
Switching the fold in mirrors when lock-
ing function on/off
If you switch on the Fold mirrors in when
locking: function, the exterior mirrors fold
in when you lock the vehicle. When you
unlock the vehicle and then open a door, the
exterior mirrors fold out again.
If you have switched the function on and you
fold the exterior mirrors in using the button
on the door ( page 101), they will not fold
Y
out automatically. The exterior mirrors can
Menus and submenus
then only be folded out using the button on
the door.
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Convenience submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Fold mirrors in when locking: func-
tion.
You will see the selected setting: on or
off.
Press the a button to save the setting.
X
Resetting to factory settings
For safety reasons, not all functions are reset:
the Limit speed (winter tyres): func-
tion in permanent SPEEDTRONIC can only be
set in the Vehicle submenu. If you want to
reset the Daytime driving lamps: in the
Light submenu, you must turn the key in the
ignition lock to position 1.
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Factory setting submenu.
Press the a button to confirm.
X
The Reset all settings? message
appears.
Press the : or 9 button to select
X
No or Yes.
Press the a button to confirm the selec-
X
tion.
If you have selected Yes, the multifunction
display shows a confirmation message.
209
Z