Mercedes-Benz E-Class 2010 Owner's Manual page 205

Menus and submenus
202
If only one telephone number is stored
X
for a name: press the 6 or a button
to start dialling.
or
If there is more than one number for a
X
particular name: press the 6 or a
button to display the numbers.
Press the 9 or : button to select the
X
number you want to dial.
Press the 6 or a button to start dial-
X
ling.
or
If you do not want to make a call: press
X
the ~ button.
Redialling
The on-board computer saves the last names
or numbers dialled in the redial memory.
Press the = or ; button on the steer-
X
ing wheel to select the Tel menu.
Press the 6 button to switch to the
X
redial memory.
Press the 9 or : button to select the
X
desired name or number.
Press the 6 or a button to start dial-
X
ling.
Assistance menu
Speed Limit Assist
Displaying Speed Limit Assist
In the Speed Lim. Asst. function, a detec-
ted speed limit is displayed under certain
conditions. You can set Speed Limit Assist
( page 182) to display a detected speed limit
Y
automatically for five seconds. Other mes-
sages in the multifunction display will be hid-
den for this length of time.
Press the = or ; button on the steer-
X
ing wheel to select the Assist. menu.
Press the 9 or : button to select
X
Speed Lim. Asst.
Press a.
X
The multifunction display shows Speed
Limit Assist.
When a limit speed is detected, this is
shown in the multifunction display until:
the speed limit ceases to apply.
R
you pass city limits.
R
the type of road changes, e.g. motorway
R
or country road.
the speed limit is no longer detected
R
after a certain distance.
Activating/deactivating the Speed Limit
Assist message function
Press the = or ; button on the steer-
X
ing wheel to select the Assist. menu.
Press the 9 or : button to select
X
Speed Lim. Asst.
Press a.
X
The multifunction display shows Speed
Limit Assist.
Press :.
X
The current selection is displayed.
To activate or deactivate: press a.
X
A detected speed limit appears automati-
cally for five seconds.
When Speed Limit Assist is operational and
the message function is activated, the multi-
function display shows the Ä symbol
when the ignition is switched on.
Showing the distance display
This function is only available with DIS-
TRONIC PLUS.